Olympus OEP-3, Service Manual

Page: 55 / 176

1-49
OEP-3 V1 (UC)
96
Installation and Adjustment
Setting Up the Printer (Continued)
COLOR ADJUST
COLOR : 200
/ COL / LAY / PRN / IN / OUT / LOAD COLOR
: 1 / 2 / 3 TEMP : 1 / 2 / 3 [EXEC]
MAG
–
G
R
N
: 0
YEL
–
B
L
U
: 0
DARK LIGHT SHARPNESS INTERPOL. SAVE COLOR CYN
–
R
E
D
: 0
Q1 A 1
S
: 0 : 0 : 8 : OFF / ON
L
IG
H
T
:
0
D
AR
K
:
0
When adjusting DARK/LIGHT (contrast)
Adjustment item
When you want to
DARK
Adjust the dark area of an image.
LIGHT
Adjust the light area of an image.
When adjusting the sharpness SHARPNESS You can set the sharpness to any of 15 steps from 1 to 15. A setting of step 8 corresponds to the standard sharpness (default setting).
When you want to
Content of settings
Make a soft outline.
To the left (toward step 1)
Make a normal outline.
Centered (step 8)
Make a sharp outline.
To the right (toward step 15)
The contrast in the dark area or light area is increased in the + direction by pressing the
g
button.
The contrast in the dark area or light area is weakened in the
–
direction
by pressing the
G
button.
The number and the corresponding sharpness increase every time you press the
g
button.
The number and the corresponding sharpness decrease every time you press the
G
button.
COLOR ADJUST
COLOR : 200
/ COL / LAY / PRN / IN / OUT / LOAD COLOR
: 1 / 2 / 3 TEMP : 1 / 2 / 3 [EXEC]
MAG
–
G
R
N
: 0
YEL
–
B
L
U
: 0
DARK LIGHT SHARPNESS INTERPOL. SAVE COLOR CYN
–
R
E
D
: 0
Q1 A 1
S
: 0 : 0 : 8 : OFF / ON
S
HA
R
P
NE
S
S
:
8
97
Installation and Adjustment
COLOR ADJUST
COLOR : 200
/ COL / LAY / PRN / IN / OUT / LOAD COLOR
: 1 / 2 / 3 TEMP : 1 / 2 / 3 [EXEC]
MAG
–
G
R
N
: 0
YEL
–
B
L
U
: 0
DARK LIGHT SHARPNESS INTERPOL. SAVE COLOR CYN
–
RED
: 0
Q1 A 1
S
: 0 : 0 : 8 : OFF / ON
I
NT
E
R
P
O
L
:
OF
F
/
o
n
COLOR ADJUST
COLOR : 200
/ COL / LAY / PRN / IN / OUT / LOAD COLOR
: 1 / 2 / 3 TEMP : 1 / 2 / 3 [EXEC]
MAG
–
G
R
N
: 0
YEL
–
B
L
U
: 0
DARK LIGHT SHARPNESS INTERPOL. SAVE COLOR CYN
–
RED
: 0
Q1 A 1
S
: 0 : 0 : 8 : OFF / ON
S
AV
E
C
O
L
O
R
:
1/
–
/
–
[
XE
EC
]
INTERPOL. (Interpolation)
When you want to
Setting
Print out image data such as a figure image or a glandscape.
ON
Print out image data of computer graphics or with small letters
OFF
Note
Effectiveness of SHARPNESS may differ between ON and OFF settings of INTERPOL. To reset items to defaults (0) Place the cursor at the adjustment item to be reset, then press the
G
and
g
buttons simultaneously. Once you have changed the value Once you have changed the value, TEMP (temporary) appears on the menu screen. TEMP indicates that the settings are temporary and have not yet been stored. If you turn off the power of the printer while TEMP is displayed, the adjusted values are not stored.
5
Select SAVE COLOR by pressing the
F
or
f
button.
Position the cursor at SAVE COLOR by pressing the
F
or
f
button.
Display SAVE COLOR by pressing the
F
or
f
button.
Switch the desired setting to green by pressing the
G
or
g
button.
Display desired setting in capital letters by pressing the
G
or
g
button.
Continue to the next page
c