Olympus OEP-3, Service Manual

Page: 35 / 176

1-29
OEP-3 V1 (UC)
56
Operation
Making
V
ariations of Printouts (Contin
ued)
Q1
A
D
U
P
4
S
Q1 A DUP 4 S
1
Start the video source. This operation is done using the controls of the video equipment acting as the source.
2
Press the CAPTURE button at the instant the image you want to print appears on the screen. The image captured in the memory appears on the whole screen. (The image is displayed in full size.) To change the image in memory
1
Start the video source.
2
Press the CAPTURE button at the instant the image you want to print appears. The previously captured image is replaced with the newly captured image.
3
Press the PRINT button. The identical reduced images are printed on one sheet of paper.
Indicates that the printer is set to the DUPLICATE application mode where four identical reduced images are printed on one sheet of paper.
57
Operation
A
B C
Q1 A 8:3
Q1 A 8:4
Q1 A 16:05
Q1 A 16:06
A
B C
X Y
Z
A
B C
X Y
Z
A
B C
Making a Printout with an Insert
You can make printouts with an insert which is a reduced image. Either eight or 16 reduced images to be captured are used for deciding the image to be inserted onto the full image. However, the position and the size of the reduced image to be inserted are those for the four reduced images.
1
Display the full-size image stored in memory by pressing the SOURCE/ MEMORY button. Or capture the full-size image in memory. (Follow steps 1 to 3 of
“Making Full-Size Image Printouts
” on page 22.)
2
Press the MULTI PICTURE button repeatedly until either the 8 or 16 reduced- image type (without white borders and in STANDARD printer application mode) is selected. (See
“Selecting the number of reduced images to be captured in memory
” on
page 41.)
3
Capture the image to be inserted.
1
Select the position where the reduced image is to be inserted by pressing the
G
,
g
,
F
or
f
button.
Example: To insert the image in the lower-left position
2
Press the CAPTURE button at the instant the image you want to insert appears. The image to be inserted is captured at the position selected in step
1
.
SOURCE/ MEMORY
MEMORY
PAGE
CAPTURE
PRINT
PRINT
ALARM
POWER
2,4
3
5
When you select 8 in step 2
Position the cursor (blinking) to this position by pressing the
G
,
g
,
F
or
f
button.
Image which appears after the CAPTURE button is pressed in step
2
.
When you select 16 in step 2
Position the cursor (blinking) at this position by pressing the
G
,
g
,
F
or
f
button.
The image which appears after the CAPTURE button is pressed in step
2
.
Continue to the next page
c