Olympus OEP-3, Service Manual

Page: 63 / 176

1-57
OEP-3 V1 (UC)
112
Installation and Adjustment
Setting Up the Printer (Continued)
I
MM
E
D
.
C
A
P
:
FUNCTION SETUP
COLOR : 200
PRN SETUP AUTO LIVE
: OFF / ON : OFF / ON
RM2 FUNC
: / C&PRINT /
RM3A FUNC
: / PRINT&PAGE +
RM3B FUNC
: / BACK - SP /
RM3C FUNC
: / CAP_SRC /
RM3E FUNC
: / CAPTURE / : PRESS [ > ] : / ALL /
Q1 A 1
S
IMMED. CAP. CLEAR
OF
F
/
o
n
F
PR
N
UN
C
T
I
O
N
S
E
T
U
P
FUNCTION SETUP
COLOR : 200
PRN SETUP AUTO LIVE
: OFF / ON : OFF / ON
RM2 FUNC
: / C&PRINT /
RM3A FUNC
: / PRINT&PAGE +
RM3B FUNC
: / BACK - SP /
RM3C FUNC
: / CAP_SRC /
RM3E FUNC
: / CAPTURE / : PRESS [ > ] : ALL /
Q1 A 1
S
IMMED. CAP. CLEAR
SE
TU
P
[
>
]
F
UN
C
T
I
O
N
:
PRINTER SETUP
COLOR : 200
/ COL / LAY / PRN / IN / OUT / PRINT QTY.
: 1 [ 1 ~ 9 ] : OFF / ON
GAMMA
: S / NORMAL / H : OFF / ON
LOAD USER
: 1 / 2 / 3 [ EXEC ]
SYSTEM
: PRESS [ > ] : PRESS [ > ]
C - BALANCE
: PRESS [ > ]
Q1 A 1
S
INTERVAL FUNCTION
PR
E
S
S
[
>
]
PRN SPEED
: /
H
IG
H
MOTION CHK
2
Select FUNCTION by pressing the
F
or
f
button.
3
Press the
g
button.
The FUNCTION SETUP menu appears. To assign the functions of a remote control unit connected to REMOTE 2, go to step 4. To assign the functions of a remote control unit connected to REMOTE 3 (3A/ 3B/3C/3E), go to step 6.
4
Select IMMED. CAP by pressing the
F
or
f
button.
Position the cursor at FUNCTION by pressing the
F
or
f
button.
Press the
F
or
f
button until
FUNCTION appears.
Position the cursor at IMMED. CAP by pressing the
F
or
f
button.
Press the
F
or
f
button until IMMED.
CAP appears.
113
Installation and Adjustment
I
MM
E
D
.
C
A
P
:
FUNCTION SETUP
COLOR : 200
PRN SETUP AUTO LIVE
: OFF / ON : OFF / ON
RM2 FUNC
: / C&PRINT /
RM3A FUNC
: / PRINT&PAGE +
RM3B FUNC
: / BACK - SP /
RM3C FUNC
: / CAP_SRC /
RM3E FUNC
: / CAPTURE / : PRESS [ > ] : / ALL /
Q1 A 1
S
IMMED. CAP. CLEAR
of
f
/
O
N
5
Select the timing to capture the image by pressing the
G
or
g
button.
when you want to Capture the image just after the trigger pulse is input to REMOTE 2 connector.
a)
Capture the image a certain interval after the trigger pulse is input to the REMOTE 2 connector.
b)
a)
When IMMED. CAP is set to ON, display the source image on the video monitor when sending the trigger pulse to the printer. The printer operation is set only to capture the image when receiving the trigger pulse.
b)
The timing is decided at the factory.
For detailed information on the timing for the REMOTE 2 connector, see page 131.
Notes
•
Select ON when you want to capture the image at the precise timing controlled from the computer.
•
To assign the function to the remote control unit connected to the REMOTE 2 connector on the FUNCTION SETUP menu, set the IMMED.CAP item on the FUNCTION SETUP menu to OFF.
6
Select the remote control unit and assign the function to the selected remote control unit. 1
Select the remote control unit to which you want to assign a function by pressing the
F
or
f
button.
Remote control unit to which the function is assigned RM-91 connected to REMOTE 2 FS-30 connected to REMOTE 3 Remote control unit that sends the trigger pulse to Pin No.5 of REMOTE 3
Selection ON OFF
Switch the desired timing selection to green by pressing the
G
or
g
button.
Display the desired timing selection in capital letters by pressing the
G
or
g
button.
Button A of FS-30 Button B of FS-30 Button C of FS-30
Remote control unit name written on the menu RM2 FUNC RM3A FUNC RM3B FUNC RM3C FUNC RM3E FUNC
Continue to the next page
c