Olympus OEP-3, Service Manual

Page: 75 / 176

1-69
OEP-3 V1 (UC)
136
Others
Err
or/W
arning Messa
g
es (Contin
ued)
Warning message On the monitor NO INPUT NO IMAGE PLEASE WAIT PRINTING MEMORY PLEASE WAIT HEAD IN COOLING PLEASE WAIT HEAD IN HEATING PLEASE WAIT NOW PRINTING
In the printer window display NO INPUT NO IMAGE PLEASE WAIT PRINTING MEMORY PLEASE WAIT HEAD IN COOLING PLEASE WAIT HEAD IN HEATING PLEASE WAIT NOW PRINTING
Possible causes and remedies The printer is not receiving an input signal from equipment corresponding to the input selected on the INPUT SETUP menu. t
Check the input signal selected on the INPUT SETUP menu. (See page 19.)
t
Check whether the video equipment is outputting a video signal in playback mode.
t
Check that the connections between the signal source equipment and the printer are secure. (See page 80.)
The image is not captured in memory. t
Capture the image in memory then start printing. (See page 24.)
In the selected memory page, the captured image is being printed or queued. t
Retry the operation once the printer finishes printing.
The thermal head has overheated. t
Leave the printer until the head cools down and this message disappears. The printer starts printing automatically.
The thermal head is being heated. t
Wait until this message disappears. The printer starts printing automatically.
The printer is printing, preventing any other operation. t
Wait until the printer finishes printing, then retry the operation.
If the Paper Jams
If the paper jams after pressing the PRINT button, the message stating that paper has jammed appears on the video monitor and in the printer window display. Follow the steps below to remove the jammed paper.
1
Open the front panel.
SOURCE/ MEMORY
MEMORY
PAGE
CAPTURE
PRINT
137
Others
SOURCE/ MEMORY
MEMORY
PAGE
CAPTURE
PRINT
SOURCE/ MEMORY
MEMORY
PAGE
CAPTURE
PRINT
SOURCE/ MEMORY
MEMORY
PAGE
CAPTURE
PRINT
2
Remove the paper cover. If any printouts have been ejected onto the paper cover and have accumulated on the paper cover, remove them before removing the paper cover.
3
Check whether any paper is jammed inside the printer. If you find a jammed sheet, slowly pull it into the paper tray.
Note
Never attempt to pull a piece of jammed paper down, up, backwards, or forwards, the paper may tangle or tear.
4
Remove the paper tray.
5
Load the paper into the paper tray correctly. •
Do not reuse the paper put back in step 3. Discard that paper.
•
Use only paper recommended in this manual.
6
Re-insert the removed paper tray and paper cover, then close the front panel.
Set the paper securely under the tab.