Olympus OEP-3, Service Manual

Page: 70 / 176

1-64
OEP-3 V1 (UC)
127
Others
Others
Precautions
Safety
•
Operate the printer using the power source specified in
“Specifications
”
(page
130).
•
Be careful not to damage the AC power cord by placing or dropping heavy objects on it; it is dangerous to use the unit with a damaged AC power cord.
•
If you do not intend to use the unit for a long time, disconnect the AC power cord.
•
Unplug the AC power cord by grasping the plug, not the cable itself.
•
Do not disassemble the unit.
•
Do not remove the cover. There is a danger of electric shock from the internal parts.
•
Be careful not to spill water or other liquids on the unit, or to allow combustible or metallic material to enter the cabinet. If used with foreign matter in the cabinet, the unit is liable to fail, or present a risk of fire or electric shock.
•
Ventilation holes are provided to prevent the unit from overheating. Be careful not to obstruct them with other units or by covering the unit with a cloth, etc.
•
If the unit malfunctions or if a foreign body falls into the cabinet, disconnect the AC power cord immediately and consult your Olympus representative or the nearest Olympus service center.
Installation
•
Avoid placing the unit in a location subject to: —
mechanical vibration
—
high humidity
—
excessive dust
—
direct or excessive sunlight
—
extremely high or low temperatures
•
Do not use other electronic equipment near the unit. The unit will not work properly in strong electromagnetic fields.
•
Do not place a heavy object such as a monitor on the printer.
Condensation
•
If the printer is subject to wide or sudden changes in temperature, such as when it is moved from a cold room to a warm room or when it is left in a room with a heater that tends to produce large amounts of moisture, condensation may form inside the printer. In such cases the printer will probably not work properly, and may even develop a fault if you persist in using it. If condensation forms, turn off the power and leave the printer to stand for at least one hour.
•
If the printing pack is subjected to wide or sudden changes in temperature, condensation may form on the ink ribbon or paper. This will cause the printer to malfunction. Also, if the printing pack is used in this state, spots are likely to appear on the printout. Therefore, avoid storing the printing pack in locations subject to wide or sudden changes of temperature.
•
To store a half-used printing pack, replace it in its original packing and reseal the package. If possible, keep the sealed printing pack in a cool, dark location. To subsequently use the printing pack, place it, in its sealed package, in a warm room for several hours. Doing so prevents condensation from forming when the printing pack is removed from its package.
126
Installation and Adjustment
Setting Up the Printer (Continued)
To copy the existing user set You can copy an existing user set to another user set number.
1
Select the source user set number by pressing the LOAD USER button.
2
Press the EXEC button to execute the selected user set.
Note
If the user set is changed, all images in memory will be cleared.
3
Select the target user set number with SAVE USER on the SYSTEM SETUP menu.
4
Press the EXEC button. The set values of the source user set, selected in step 1, are copied to the target user set number selected in step 3.