Olympus OEP-3, Service Manual

Page: 17 / 176

1-11
OEP-3 V1 (UC)
20
Operation
Before Printing (Continued)
3
Select the desired input signal. Press the INPUT SELECT button repeatedly until the color of the desired input signal turns green on the monitor or until the desired input signal is spelled out on the printer window display. Each time you press the INPUT SELECT button, the input signal changes in the order of VIDEO
c
S-VIDEO
c
RGB
c
VIDEO....
The selected signal will disappear within about three seconds.
Source signal of the image to be printed Signal from video equipment connected to the VIDEO INPUT connector Signal from video equipment connected to the S-VIDEO INPUT connector Signal from video equipment connected to the RGB/SYNC INPUT connectors
To confirm the currently selected input signal Press the INPUT SELECT button. The currently selected input signal appears in green on the video monitor and is spelled out in the printer window display for about 3 seconds.
Note
If you press the INPUT SELECT button when the memory image (the image stored in memory) is displayed, the memory image will be replaced with the source image (the image sent from the source equipment).
Video monitor and printer window display (the selected input signal is spelled out) V
c
VIDEO
SV
c
S VIDEO
R
c
RGB
21
Operation
INPUT SETUP
COLOR : 200
/ COL / LAY / PRN / IN / OUT / INPUT SEL
: VIDEO / SV / R
HUE
: 0
COLOR
: 0
GAIN
: 0
OFFSET
: 0
AGC
: OFF / ON
Q1 A 1
S
I
VI
D
E
O
/
s
v
/
r
NP
U
T
S
E
L
:
INPUT SETUP
COLOR : 200
/ COL / LAY / PRN / IN / OUT /
: VIDEO / SV / R
HUE
: 0
COLOR
: 0
GAIN
: 0
OFFSET
: 0
AGC
: OFF / ON
Q1 A 1
S
I
VI
D
E
O
/
s
v
/
r
NP
U
T
S
E
L
:
INPUT SEL
I
/
c
/
l
/p
/
I
N
/
o/
NP
U
T
S
E
T
U
P
INPUT SETUP
COLOR : 200
/ COL / LAY / PRN / IN / OUT / INPUT SEL
: VIDEO / SV / R
HUE
: 0
COLOR
: 0
GAIN
: 0
OFFSET
: 0
AGC
: OFF / ON
Q1 A 1
S
SOURCE/ MEMORY
MEMORY
PAGE
CAPTURE
PRINT
PRINT
ALARM
POWER
Selecting the input signal on the menu
1
Turn on the video monitor and the printer.
2
Press the INPUT SETUP button. The INPUT SETUP menu appears.
3
Select INPUT SEL by pressing the
F
or
f
button.
4
Select the desired input signal by pressing the
G
or
g
button.
5
Press the INPUT SETUP button. The regular screen appears.
1
2,5
3
4
Position the cursor at INPUT SEL by pressing the
F
or
f
button.
Press the
F
or
f
button until
INPUT SEL appears.
Switch the desired input signal to green by pressing the
G
or
g
button. The selected input
signal turns green and is spelled out.
Display the spelled-out input signal by pressing the
G
or
g
button.