1-58
OEP-3 V1 (UC)
114
Installation and Adjustment
Setting Up the Printer (Continued)
R
M2
F
U
N
C
:
FUNCTION SETUP
COLOR : 200
PRN SETUP
AUTO LIVE
: OFF / ON
: OFF / ON
RM2 FUNC
: / C&PRINT /
RM3A FUNC
: / PRINT&PAGE +
RM3B FUNC
: / BACK - SP /
RM3C FUNC
: / CAP_SRC /
RM3E FUNC
: / CAPTURE /
: PRESS [ > ]
: / ALL /
Q1 A 1
S
IMMED. CAP.
CLEAR
&
C
/P
R
I
N
T
/
The figure shows the case where you want to assign a function to the remote
control unit connected to REMOTE 2. You can select any remote control unit in
the same way.
2
Assign a function to the remote control unit selected in 1 by pressing the
G
or
g
button.
Position the cursor at the desired remote
control unit by pressing the
F
or
f
button.
Display the desired remote control
unit by pressing the
F
or
f
button.
Function to be selected
GRAB
CAPTURE
C & PRINT
a)
(CAPTURE & PRINT)
CYCLIC-C
b)
(CYCLIC CAPTURE)
CAP-STOP
b)
(CAPTURE STOP)
BACK-SP
(CAPTURE BACK)
STOP
Operation
Captures an image when you press the switch of the
remote control unit. When the type of multiple
reduced images has been selected, the cursor (green
pointer) does not move on the video monitor. Also,
the memory page is not changed.
Has the same function as the CAPTURE button on
the printer.
Has the same function as the PRINT button on the
printer.
Captures an image to a memory page where there is
not queued image to be printed. If you press the
switch while printing is being performed, the selected
image is queued, with the queued image being
printed once printing has been completed.
Captures images to memory pages where there are
not queued images, cyclically whenever you press
the switch. The printer continues to capture images,
replacing the one previously captured with a new
one.
Captures images in a memory page when you press
the switch of the remote control unit. Once images
have been captured in all the memory pages, the
printer stops capturing images and the message HIT
ANY KEY appears.
The pointer (green) returns to its former position
whenever you press the switch when the type of
multiple reduced images has been selected.
The cursor (green pointer) moves to the next position
whenever you press the switch when the type of
multiple reduced images has been selected.
Stops printing after the current printing operation is
finished whenever you press the switch of the remote
control unit.
115
Installation and Adjustment
Function to be selected
CAP/SRC
(CAPTURE/SOURCE)
C/SRC PAGE
b)
(CAPTURE/SOURCE PAGE)
PRINT & PAGE
SRC & CAP
(SOURCE & CAPTURE)
SRC & C PAGE
b)
(SOURCE & CAPTURE PAGE)
Operation
When the memory image is displayed, the source
image appears whenever you press the switch.
When the source image is displayed, the image is
captured in memory whenever you press the switch
of the remote control unit. However, the memory
page is not changed. The previously captured image
is replaced with the new one.
When the memory image is displayed, the source
image appears whenever you press the switch of the
remote control unit.
When the source image is displayed, the image is
captured in memory whenever you press the switch.
The memory page is also changed. The captured
image is not printed.
Starts to print when you press the switch if the image
has been captured in the memory, and at the same
time moving to the next memory page.
If the image has not been captured in the memory
page, the printer does not work correctly when you
press the switch of the remote control unit.
When you press and hold down the switch of the
remote control unit, the source image appears.
When you release the switch, the image showing at
the instant you release the switch is captured. The
memory page is not changed.
When you press and hold down the switch of the
remote control unit, the source image appears.
When you release the switch, the image showing at
the instant you release the switch is captured. Then,
the memory page is changed to the next memory
page. The captured image is not printed.
a)
When you use the remote control unit under this function, confirm that the source image is
displayed on the video monitor. If not, press the SOURCE/MEMORY button so that the
source image will be displayed. When multiple reduced images are captured, after the last
image is captured, the printer prints the captured image (or queues printing), then the printer
goes to the next memory page.
b)
When multiple reduced images are captured, after the last image is captured, the printer goes
to the next memory page.
Continue to the next page
c
Summary of Contents for OEP-3
