Olympus OEP-3, Service Manual

Page: 20 / 176

1-14
OEP-3 V1 (UC)
26
Operation
Making Full-Size Image Printouts (Continued)
L
1/
–
/
–
[
EX
E
C
]
OA
D
U
S
E
R
LOAD USER
1 / 2 / 3
[EXEC
]
:
Making Printouts with the Desired User Set Number
You can register all the printer settings as a user settings. The printer allows you to register three sets of settings as User Set 1, 2 and 3. (See
“Registering a User Set
”
on page 123.) By selecting a desired user set number, the printer functions according to the corresponding settings. You can change a part of the selected user settings and make printouts.
Note
If you change the currently selected user set to another one, the image stored in memory pages will be cleared.
1
Turn on the video monitor and printer.
2
Start the video source to display the source image on the video monitor. This operation is done using the controls of the video equipment acting as the source.
3
Press the LOAD USER button. The currently selected user setting appears.
The currently selected user set number is lit in green.
SOURCE/ MEMORY
MEMORY
PAGE
CAPTURE
PRINT
PRINT
ALARM
POWER
1
6
3,4
7
5
The currently selected user set number is displayed.
27
Operation
P
USER
3
RE
S
E
T
-
3
L
O
A
D
I
N
G
USER 3
PLEASE WAIT
USER PRESET - 3 LOADING
L
–
/
–
/3
[
EX
E
C
]
OA
D
U
S
E
R
:
LOAD USER
:
1 / 2 / 3 [ EXEC ]
4
Select the user set number. Press the LOAD USER button repeatedly until the desired user set turns green on the video monitor or until the desired user set is displayed on the printer window display. Each time you press the LOAD USER button, the user set number changes in the order of 1
c
2
c
3
c
1....
The selected user set number will disappear within about three seconds.
5
Press the EXEC button. The user set selected in step 4 is executed. While the selected user set is being executed, the following message appears.
6
Press the CAPTURE button at the instant the image you want to print appears on the screen. The image is captured into memory.
7
Press the PRINT button. The printer makes printouts according to the user set selected in step 4.
When the user name is registered, the user name appears.
Switch the desired user set number to green.
Display the desired user set number.