Olympus OEP-3, Service Manual

Page: 10 / 176

1-4
OEP-3 V1 (UC)
6
Introduction
System Overview
Printout of a full-size image (page 22) Printout of four reduced images (page 41)
Printout of eight reduced images (page 41)
SAMPLE 123
The OEP-3 color video printer is designed for capturing images from video equipment, computers and medical equipment devices such as a video system center, TV camera, monitor photo unit and so on and for printing out high resolution images in full color (with 256 shades per color, a total of more than 16,700,000 colors in all) in high resolution print mode (approximately 300 dpi). You can make various types of printouts. You can also add a caption to the printout. You can carry out ordinary printer operation by using the buttons and setup the printer interactively by picking from displayed menus.
Printouts that can be made with the printer
Printout of 16 reduced images (page 41)
Printout of identical images (page 55) Printout with an insert (page 57)
In addition to the above printouts of multiple reduced images with white borders, printout of multiple reduced images without white borders can be made. Also, you can make a printout of two reduced images with or without white boarders and mirror image(s) where the image is rotated about its vertical axis.
Printout with a caption (page 60)
7
Introduction
SOURCE/ MEMORY
MEMORY
PAGE
CAPTURE
PRINT
PRINT
ALARM
POWER
Display monitor Displays the images received from the video source (source image) and the image to be printed (memory image). Also displays the printer menus and messages. When the printer power switch is set to off, you can view the image from the video source.
Color video printer
System Configuration
The following shows an example of a printer system configuration.
Remote control unit (supplied) allows you to operate the printer remotely.
Observation monitor
Vdieo System Center
TV camera
Note
Connect the power cord of the monitors to the wall output via the isolation transfer. When your monitors are OEV-143/203 Color Video monitor, you do not need to connect their power codes to the isolation transformer. You can connect them directly to the wall outlet .