1-55
OEP-3 V1 (UC)
108
Installation and Adjustment
Setting Up the Printer (Continued)
A B C
X Y Z
A B C
X Y Z
A B C
X Y Z
A B C
X Y Z
A B C
X Y Z
A B C
X Y Z
A B C
X Y Z
A B C
X Y Z
A B C
X Y Z
COLOR BALANCE (X&Y) 45&45 50&45 55&45 45&50 50&50 55&50 45&55 50&55 55&55
8
Press the EXEC button.
Nine identical images are printed on a sheet of paper as a test print.
Each image has a different color balance.
Example of the actual color change in the test print
9
Select the image which has the best color balance among the nine images.
If you want to change the color balance after you see the printout, adjust the
color balance again, referring to
“To readjust the color balance
” on page 109.
Indicates the color balance of the images printed at
the top. (From the left, 45 & 45, 50 & 45, 55 & 45)
Indicates the color balance of the images printed in the
middle. (From the left, 45 & 50, 50 & 50, 55 & 50)
Indicates the color balance
of the images printed at the
bottom. (From the left, 45 &
55, 50 & 55, 55 & 55)
Yellow greenish
Greenish
Blue greenish
Yellowish
Standard
Bluish
Orangish
Reddish
Red purplish
109
Installation and Adjustment
47&47
50&47
53&47
47&50
50&50
53&50
47&53
50&53
53&53
COLOR BALANCE
BAL X
: 5
0
[
1
–
50
–
99]
BAL Y
: 5
0
[
1
–
50
–
99]
B
A
L
STEP
: 03 [1
–
20]
TEST PRINT
: PRESS [EXEC]
PRN SETUP
: PRESS [ > ]
Q1 A 1
S
COLOR : 200
COLOR BALANCE
BAL X
: 5
5
[
1
–
50
–
99]
BAL Y
: 4
5
[
1
–
50
–
99]
BAL
STEP
: 05 [1
–
20]
TEST PRINT
: PRESS [EXEC]
PRN SETUP
: PRESS [ > ]
Q1 A 1
S
COLOR : 200
10
Display the values of BAL X and BAL Y corresponding to the ones of the
image selected in step 9 by using the
G
or
g
button.
Example:
When the color balance (55 & 45) of the image printed on the
bottom left is the best:
The color balance has been adjusted to the values selected in step 9.
11
Press the MENU button.
The regular screen appears.
To readjust the color balance
When the desired color balance cannot be obtained in step 9, readjust the color
balance.
You can also perform fine adjustment following the same operation procedures.
1
Display the values of BAL X and BAL Y of the image which is the most
appropriate among nine images.
In this case, you can perform fine adjustment or rough adjustment by changing
the value of BAL STEP.
To perform fine adjustment
To perform color balance adjustment within the current color balance range,
reduce the value of BAL STEP.
Note
The above illustration indicates the color balance when the balance step is
changed from 05 to 03. However, on the actual printout, values of the color
balance are not printed on each image. They are printed on the bottom of the
printout.
Display 55 for BAL X and 45 for BAL Y
by pressing the
G
or
g
button.
Display BAL X by pressing the
F
or
f
button,
then 55 by pressing the
G
or
g
button.
Display BAL Y by pressing the
F
or
f
button,
then 45 by pressing the
G
or
g
button.
B
55
AL
X
:
[
1-
5
0
-9
9
]
B
AL
Y
:
45
[
1-
5
0
-9
9
]
If you change BAL STEP from 05 to 03, the color
balances of the test print are changed as
illustrated.
Continue to the next page
c
Summary of Contents for OEP-3
