NXP Semiconductors KE1xF Series, Reference Manual, Page: 988 / 1483

FTMx_SYNC field descriptions (continued)
Field Description
0 OUTMASK register is updated with the value of its buffer in all rising edges of the FTM input clock.
1 OUTMASK register is updated with the value of its buffer only by the PWM synchronization.
2
REINIT
FTM Counter Reinitialization By Synchronization ( FTM counter synchronization )
Determines if the FTM counter is reinitialized when the selected trigger for the synchronization is detected.
The REINIT bit configures the synchronization when SYNCMODE is zero.
0 FTM counter continues to count normally.
1 FTM counter is updated with its initial value when the selected trigger is detected.
1
CNTMAX
Maximum Loading Point Enable
Selects the maximum loading point to PWM synchronization. See Synchronization Points . If CNTMAX is 1,
the selected loading point is when the FTM counter reaches its maximum value (MOD register).
0 The maximum loading point is disabled.
1 The maximum loading point is enabled.
0
CNTMIN
Minimum Loading Point Enable
Selects the minimum loading point to PWM synchronization. See Synchronization Points . If CNTMIN is
one, the selected loading point is when the FTM counter reaches its minimum value (CNTIN register).
0 The minimum loading point is disabled.
1 The minimum loading point is enabled.
41.4.12 Initial State For Channels Output (FTMx_OUTINIT)
Address: Base a 5Ch offset
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
R
0
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0
CH7OI CH6OI CH5OI CH4OI CH3OI CH2OI CH1OI CH0OI
W
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
FTMx_OUTINIT field descriptions
Field Description
31–8
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
Table continues on the next page...
Memory map and register definition
Kinetis KE1xF Sub-Family Reference Manual, Rev. 4, 06/2019
988 NXP Semiconductors