NXP Semiconductors KE1xF Series, Reference Manual, Page: 1022 / 1483

FTM counter
0
3
4 0 1 2
3 4 0 1 2 3 4 0 1
2
0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
channel (n) output
counter
overflow
channel (n)
match
counter
overflow
channel (n)
match
channel (n)
match
counter
overflow
FTM counting is up.
Channel (n) is in high-true EPWM mode.
PS[2:0] = 001
CNTIN = 0x0000
MOD = 0x0004
CnV = 0x0002
prescaler counter
Figure 41-2. Notation used
41.5.1 Clock source
The FTM has only one clock domain: the FTM input clock.
41.5.1.1 Counter clock source
The CLKS[1:0] bits in the SC register select one of three possible clock sources for the
FTM counter or disable the FTM counter. After any chip reset, CLKS[1:0] = 0:0 so no
clock source is selected.
The CLKS[1:0] bits may be read or written at any time. Disabling the FTM counter by
writing 0:0 to the CLKS[1:0] bits does not affect the FTM counter value or other
registers.
The fixed frequency clock is an alternative clock source for the FTM counter that allows
the selection of a clock other than the FTM input clock or an external clock. This clock
input is defined by chip integration. Refer to the chip specific documentation for further
information. Due to FTM hardware implementation limitations, the frequency of the
fixed frequency clock must not exceed 1/2 of the FTM input clock frequency.
Functional description
Kinetis KE1xF Sub-Family Reference Manual, Rev. 4, 06/2019
1022 NXP Semiconductors