NXP Semiconductors KE1xF Series, Reference Manual, Page: 725 / 1483

Chapter 31
Cyclic Redundancy Check (CRC)
31.1 Introduction
The cyclic redundancy check (CRC) module generates 16/32-bit CRC code for error
detection.
The CRC module provides a programmable polynomial and other parameters required to
implement a 16-bit or 32-bit CRC standard.
The 16/32-bit code is calculated for 32 bits of data at a time.
31.1.1 Features
Features of the CRC module include:
• Hardware CRC generator circuit using a 16-bit or 32-bit programmable shift register
• Programmable initial seed value and polynomial
• Option to transpose input data or output data (the CRC result) bitwise or bytewise.
This option is required for certain CRC standards. A bytewise transpose operation is
not possible when accessing the CRC data register via 8-bit accesses. In this case, the
user's software must perform the bytewise transpose function.
• Option for inversion of final CRC result
• 32-bit CPU register programming interface
31.1.2 Block diagram
The following is a block diagram of the CRC.
Kinetis KE1xF Sub-Family Reference Manual, Rev. 4, 06/2019
NXP Semiconductors 725