7.Digital Operator
Velocity-controlled JOG Operation
7-13
7.8
Velocity-controlled JOG Operation
Step
Displayed
character,
number, code
Input
button
How to operate
1
MODE
Push MODE until it displays the left.
2
Display changes and right end LED blinks.
3
Make as the left display with addition and subtraction and
the cursor button.
4
WR
Push WR for more than 1 second.
5
Changes to the left display.
6
WR
Push WR for more than 1 second.
7
The character of 8 is drawn and servo is on.
8
If it continues pushing an addition button, a motor shaft will
rotate in the CCW direction. Will stop when an addition
button is detached.
9
If it continues pushing an addition button, a motor shaft will
rotate in the CW direction. Will stop when a subtraction
button is detached.
10
MODE
Push MODE.
11
Servo is off and it changes to the left display.
12
MODE
Push MODE.
13
Completes and changes to the left display.
For stopping during operation, please push the MODE button.
MODE is pushed in Process 2.
Changes to the left display and shifts to system parameter.
MODE is pushed in Process 5.
Changes to the left display and returns to step 2.
MODE is pushed in Process 7.
Changes to the left display and returns to step 5.
Mode is pushed again.
Completes and changes to the left display.
✔
The display shown below refers to Over Travel Status.
Over-travel status at CW rotation.
Over-travel status at CCW rotation.
■
For the Over Travel Function, settings may be edited by the general parameters Gr9.00 and Gr9.01.
For details, see
“
Functions enabling condition settings (5-78).
”
Summary of Contents for M-EGA-15A2301
Page 149: ...No Text on This Page ...
Page 237: ......