3.Installation
Driver
3
-
3
I
I
3)
Mounting direction and location
✔
Refer to optional parts, Appendix, for metal fittings for front mounting.
4)
Control arrangement within the machine
■
Leave at least 50 [mm] space above and below the driver to ensure unobstructed airflow from the inside
of the driver and the radiator. If heat gets trapped around the driver, use a cooling fan to create airflow.
■
Make sure the temperature around the driver does not exceed 55[°C]. For longevity and reliability
purposes it is recommended to keep the temperature below 40[°C].
■
Leave at least 10 [mm] space on both sides of the driver to ensure unobstructed airflow from the heat
sinks on the side and from the inside of the driver.
■
If the driver is installed on its side, make sure that the ambient temperature does not exceed 50[°C], and
mount the back panel to a metal plate.
✔
Recommended metal plate thickness is 2[mm] or more
■
Since M
-
EGA
-
30A2301 is equipped with ventilation fan on its side, installation of driver as shown below is
recommended.
In the case of front-mounting
Ventilation
M4
M4
Front mounting
In the case of rear
-
mounting
M4
M4
I
50mm or more
50mm or more
10mm or
more
10mm or
more
10mm or
more
Driver
Fan
Side view
Venti
50mm or more
50mm or more
Front view
Summary of Contents for M-EGA-15A2301
Page 149: ...No Text on This Page ...
Page 237: ......