NSK M-EGA-15A2301, User Manual

Page: 50 / 237

3.Installation Cable
3-9
3.4 Cable (motor and converter)
1) Precautions
Follow the precautions listed below when installing the cable.
■
General precautions
Remember that installation near any combustibles can cause a fire.
Never attempt to place any heavy materials on the converter or do not stand on the cable.
Use the cable within the range of specified environmental conditions.
Do not fall the cable nor expose it to any strong impact.
If the cable is found damaged, immediately return it to us for proper repair.
Do not cut cables for extension, reduction, or connection.
Do not give stress such as tension or vibration to connecting part of cable and connector.
■
Precautions for installation
In order to ensure extended service life and high reliance, use the cable at a temperature below 40[°C].
If cable is to be exposed to severe vibration, fix the cable near connector so that connector does not suffer
from stress.
■
Where any heating element is located nearby
Even if temperature increase is expected due to thermal convection and/or radiation, keep the
surroundings of cable below 40[°C].
■
Where corrosive gas is present
Extended use can cause contact failure in the connectors and contact elements. Never use the cable in
any location exposed to corrosive gas.
■
Where explosive or combustible gas is present
Never use the cable in any location exposed to explosive or combustible gas.
■
Where any source of generating large noise is present
Where there is a possibility of noise contamination, make proper provisions such as consideration of
power line wiring and prevention of noise generation.