2.Specifications
Power supply and caloric value
2-6
2.3
Power supply
1)
Main circuit power supply capacity, control power supply capacity
Driver Input
voltage
Motor model
Rated
output
[W]
Rated main circuit
power supply [kVA]
Control
power supply
[VA]
200[VAC]
PB1006
63
0.3
40
PB3015
157
0.5
PB3030
314
1.0
PB3060
125
2.0
✔
Values are of rated speed, torque ratings.
2)
Incoming current, leakage current
Incoming current
Driver Input
voltage
Control circuit (Max. value in 1[ms]
after power-on sequence)
Main circuit (Max. value in 1.2[s]
after power-on sequence)
200[VAC]
40[A](O-P)
22[A](O-P)
✔
Using thermistor for incoming prevention circuit of control power supply. This is the
maximum current value under normal temperature conditions when 230[VAC] is supplied.
✔
Incoming current value is the value when 230[VAC] is supplied.
✔
When the power is turned ON again immediately after disconnection, power supply
disconnection is repeated for a short period of time, ambient temperature is high, or, the
thermistor temperature rises, the incoming current exceeding the above table may pass.
Leakage current
Leakage current
0.8[mA]
✔
These values are applicable when a tough rubber sheath cable of 2[m] is used as a power
line. In the case of a shorter or longer cable length, values of the above table should be
selected as closely as possible.
✔
The machine should be grounded so that dangerous voltage does not occur at the main part
of the machine, such as the operation panel, etc., during a period of emergency leakage
current.
✔
The value of leaked current is the measured value using ordinary leak checkers (Filter
700[Hz]).
When electric leakage current of high frequency flows through the floating capacity of the
motor winding, power cable or driver, malfunctions may occur in the short circuit breaker
and protective relay in the power supply electric circuit. Use the inverter as an electricity
leakage breaker to provide countermeasures for incorrect operations.
Summary of Contents for M-EGA-15A2301
Page 149: ...No Text on This Page ...
Page 237: ......