NSK M-EGA-15A2301, User Manual

Page: 54 / 237

4.Wiring Crimping processing, tightening torque
4-3
5) Crimping of wires
Insert the wire into ferrule, and use a special tool to crimp it in.
Insert the ferrule deep into the connector, and tighten it with a special minus screwdriver or
something. The recommended torque is 0.5 to 0.6 [N
･
m].
■
Model number of recommended ferrules and crimping tools for various wire sizes
mm
2
AWG Model number
0.75 19 AI0.75-8GY
1.0 18 AI1-8RD
1.5 16 AI1.5-8BK
2.5 14 AI2.5-8BU
✔
GY: Gray, RD: Red, BK: Black, BU: Blue
✔
Crimping tool model number: 0.25 to 6[mm
2
] : CRIMPFOX UD 6-4, 0.75 to 10[mm
2
]: CRIMPFOX UD
10-4GY
✔
Manufactured by Phoenix Contact.
✔
The procedures above are recommendations. Consider the use of equivalent products for both ferrule
and crimping tool.
6) High voltage circuit terminal; tightening torque
Terminal marking
CNA
0.5 to 0.6 [N
･
m]
1.18 [N
･
m]
M4 (screw size)
Process 1
Process 2
Process 3
Ferrule
Wire