NF FRA51602, Instruction Manual

Page: 231 / 286

7.2 Information messages
7
-
7
FRA 51602
Table 7-6 Messages presented during operation (continued)
No. Message Description
4096 Done.
<Graph Min Phase> to <Graph Max
Phase>
Press the Cancel key to exit the
execution mode.
During the execution of phase shift
4097 Done.
Press the Cancel key to exit the
execution mode.
During marker search
6144 Are you sure you want to save the
current settings to the <dist>?
Confirmation for saving to a setting data file.
6145 Are you sure you want to load the
<file> to the current settings?
Confirmation for reading from a setting data file.
6146 Are you sure you want to delete the
<file>?
Confirmation for deleting a setting data file.
6147 Are you sure you want to save the
MEAS TRACE to the <dist>?
Confirmation for saving to a measurement data file.
6148 Are you sure you want to load the
<file> to the <dist1>?
Confirmation for reading from a measurement data
file.
6149 Are you sure you want to delete the
<file>?
Confirmation for deleting a measurement data file.
6150 <file> already exists.
Are you sure you want to replace it?
Confirmation for overwriting a file in USB memory.
7168 Are you sure you want to reset the
current settings?
Confirmation for initialization.
7169 Do you want to execute the "TOUCH
ADJUST"?
Confirmation for beginning touch panel adjustment.
7170 Are you sure you want to initialize all
the current settings?
Confirmation for initializing to factory settings.
7171 USB connected. A USB memory device (or printer) has been
connected to the instrument.
7172 USB disconnected. A USB memory device (or printer) has been removed
from the instrument.
<dist>: This is the destination for saving data. For internal memory, it is replaced with "memory
number X", where X is 1 to 20. For USB memory, it is replaced with "USB storage".
<dist1>: Depending on the save destination, it is replaced with "MEAS TRACE", "REF TRACE",
"Equalize correction memory", "Open correction memory", "Short correction memory", or