NF FRA51602, Instruction Manual

Page: 134 / 286

4.1 Display and operation for powering up
4
-
4
FRA 51602
4.1.4 Startup screen and operation
When the power is turned on, the startup screen is displayed. For the first several seconds, all of the lamps
are lit for operation check.
During that time, internal initialization and self-diagnosis are performed. If an abnormality occurs, an error
message is displayed. In that case, set the power switch on the rear panel to the off position, wait at least
five seconds, and then set the power switch back to the on position. If the error occurs again, the instrument
may be malfunctioning, so please contact the NF Corporation or its authorized agent.
Start up screen
When the instrument starts up normally, the initial screen is displayed.
Initial screen
From this point on, operations such as setting and measurement, etc. are possible.