NF FRA51602, Instruction Manual

Page: 171 / 286

5.5 Graph display
5
-
15
FRA 51602
■ Deleting a trace
The data for the respective traces can be deleted with
【
Trace
】
–
[DELETE MEAS]
and –
[DELETE REF]
.
Deleted data cannot be recovered, so perform this operation with care.
■ Displaying and hiding traces
To set a trace to be displayed or not displayed (hidden), select
【
Graph
】
–
[DISPLAY TRACE]
and tap on
the function key. The second line in the label for each function key indicates the action that will be
performed when the key is tapped. While a trace is being displayed, [OFF] is shown on the second line of
the function key for that trace. If you tap the function key in that state, the corresponding trace will be
hidden and the second line of that function key will change to [ON] .
Even though the trace is not being displayed, the data remains. By tapping a function key whose
secondline is displayed [ON] , the corresponding trace will be displayed again.
Another way to switch a trace on / off is to select
【
Graph
】
–
[DISPLAY TRACE]
and push the
ENTER
key.
Then a list box will appear.
1) Tap OK.
3) Select data to save.
1) Select DISPLAY TRACE.