NF FRA51602, Instruction Manual

Page: 114 / 286

3.5 Operation screen reference
3
-
76
FRA 51602
■
【
DATA FILE (USB memory)
】
: Data file operations (USB memory)
These operations include saving and reading data to and from files that are stored in the USB memory
device that is installed in the USB port on the front panel of the instrument.
○ Setting method
< Execution operations (selection) >
○ Function key functions
• [
⇒
INT MEM] : Display a list of the files in the internal memory.
• [SAVE]
: Save to the USB memory device.
• [LOAD]
: Read from the USB memory device.
• [DELETE]
: Delete files or folders from the USB memory device.
• [RENAME]
: Change a file name.
Tapping on the
[SAVE]
function key displays the text entry dialog
【
TEXT
】
, where you can enter the
file name. After entering the file name, use the function keys listed below to select where the data is to
be saved.
• [MEAS TRACE]
: Save the measured data to the USB memory device.
• [REF TRACE]
: Save the reference data to the USB memory device.
If you tap the [LOAD] function key, the function keys listed below are displayed for specifying what is
to be loaded.
• [MEAS TRACE]
: Load to the measurement data.
• [REF TRACE]
: Load to the reference data.
• [EQUALIZE CORR MEM]
: Load to the equalizing data.
■ [EJECT]
: Eject the USB memory device.
Perform drive unmounting processing so that the USB memory device can be safely removed.
○ Setting method
< Execution operations (selection) >
If you select a menu and press the
ENTER
key, a processing completed message will be displayed. After
the message has been displayed, remove the USB memory device.
If you leave the USB device in the port after it has been ejected, it cannot be accessed. Remove the USB
device from the port and reinsert it so that the device will be recognized and become available for access.