NF FRA51602, Instruction Manual

Page: 142 / 286

4.2 Simple operation for the first use
4
-
12
FRA 51602
Follow the procedure described below for instrument set-up and performing measurements.
1) Initialize settings.
2) Set the item that is to be displayed on the graph Y axis.
Set
【
Graph
】
dialog
－
[DISPLAY MODE][Y AXIS]
to
LOG R
－
LIN θ
. For more information, read
" 3.5.4 Graph dialog ".
3) Press the
BASIC SETUP
key and change the settings as necessary.
[SWEEP LOWER] : Sweep lower frequency
[SWEEP UPPER] : Sweep upper frequency
[AMPLITUDE] : Measurement amplitude
[INTEGRATION] : Number of integrations
4) Press the
AC/DC ON
key on the front panel to turn the oscillator output on.
5) Press the
MEASURE DOWN
key on the front panel to perform a sweep measurement and wait until the
measurement is completed.
6) Turn the knob to move the marker on the measurement data. You can read the measured value at any
frequency. You can also detect maximum values, search, find the location of an arbitrary gain value, and
perform other such operations. For more information on the operations, read "
5.6 Marker operations
".