Mitsubishi Electric MELSEC iQ-R RD75P4, User Manual

Page: 477 / 598

12 DATA USED FOR POSITIONING CONTROL
12.8 Control Data
475
12
[Cd.18] Continuous operation interrupt request
Set this area to interrupt continuous operation.
• The continuous operation is interrupted by setting 1: Interrupt continuous control or continuous path control for this area.
• After the continuous operation interruption is accepted, 0 is automatically stored. Storing 0 indicates the completion of the
continuous operation interruption.
■
Buffer memory address
The following table shows the buffer memory address of this area.
■ Default value
The default value is 0 for all the axes.
[Cd.19] OPR request flag OFF request
Set this area to request to forcibly turn off the OPR request flag with the program when the flag is on.
• The OPR request flag is turned off by setting 1: Turn off OPR request flag for this area.
• After the OPR request flag is turned off, 0 is automatically stored. Storing 0 indicates the completion of the OPR request
flag OFF request.
■
Buffer memory address
The following table shows the buffer memory address of this area.
■
Default value
The default value is 0 for all the axes.
[Cd.20] Manual pulse generator 1 pulse input magnification
Set the factor by which the number of pulses from the manual pulse generator is magnified.
• When the setting value is 0, the value is handled as 1.
• When the setting value is 10001 or greater, the value is handled as 10000.
■
Buffer memory address
The following table shows the buffer memory address of this area.
■
Setting range
The setting range is 1 to 10000.
■ Default value
The default value is 1 for all the axes.
Buffer memory name Axis 1 Axis 2 Axis 3 Axis 4
[Cd.18] Continuous operation interrupt request 1520 1620 1720 1820
Buffer memory name Axis 1 Axis 2 Axis 3 Axis 4
[Cd.19] OPR request flag OFF request 1521 1621 1721 1821
Buffer memory name Axis 1 Axis 2 Axis 3 Axis 4
[Cd.20] Manual pulse generator 1 pulse input magnification 1522 1622 1722 1822
1523 1623 1723 1823