Mitsubishi Electric MELSEC iQ-R RD75P4, User Manual

Page: 334 / 598

332
10 MONITORING/TEST
10.2 Positioning Test
10.2
Positioning Test
This function allows users to perform the following tests while the users monitor the current status of the RD75.
• Positioning control test
• JOG/manual pulse generator/OPR test
• Speed change test
• Other tests
Precautions
Before the positioning test is started, necessary parameters and positioning data must be set and written to the RD75.
Starting method
Start "Positioning test" with the following procedure.
1.
Display the "Module Tool List" window and select
"Positioning test".
[Tool]  [Module Tool List]  [Positioning test]
2.
Select the RD75 being used from the "Module Selection
(Positioning Test)" window and click the [OK] button.
3.
If external input signals are used for the positioning test,
click the [Yes] button. If no external input signal is used
for the test, click the [No] button.