Mitsubishi Electric MELSEC iQ-R RD75P4, User Manual

Page: 330 / 598

328
9 PARAMETER SETTING
9.3 Module Extension Parameter
Block start data
Set the block start data number 0 to 4 for each axis.
Condition data
Set condition data for each block start data.
■
Setting method
Item Setting range Reference
Shape • 0: Termination
• 1: Continue Page 436 [Da.11] Shape
Start data No. 1 to 600 Page 436 [Da.12] Start data No.
Special start instruction • 00h: Normal start
• 01h: Condition start
• 02h: Wait start
• 03h: Simultaneous start
• 04h: FOR loop
• 05h: FOR condition
• 06h: NEXT start Page 437 [Da.13] Special start instruction
Parameter • 1 to 10
• 0 to 255 Page 438 [Da.14] Parameter
1.
Double-click "Condition data edit" in "Axis  Block start
data".
2.
Click the cell of the condition data number to be edited
and click the [Edit] button.
3.
Select settings of "Condition Operator" and "Condition
Identifier" from the pull-down menu.
4.
Set "Condition Data" according to the condition set in
step 3.
5.
Click the [OK] button.
6.
Click the [Close] button.