Mitsubishi Electric apricot VS660, System Product Manual

Page: 95 / 154

5-20
Installing and Configuring System Board Options
▲
▲
!
VARNING
Explosionsfara vid felaktigt batteribyte. Använd samma batterityp
eller en ekvivalent typ som rekommenderas av apparattillverkaren.
Kassera använt batteri enligt fabrikantens instruktion.
▲
▲
!
VAROITUS
Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo
ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käjtetty
paristo valmistajan ohjeiden mukaisesti.
To replace the battery, do the following:
1. Observe the precautions in “Before You Begin.”
2. Turn off all peripheral devices connected to the system.
3. Turn off the system.
4. Remove any components that are blocking access to the battery.
5. Figure 5-1 shows the battery location. Gently pry the battery free from
its socket, taking care to note the "+" and "-" orientation of the battery
(Figure 5-7).
6. Install the new battery in the socket.
7. Replace any system parts that were previously removed.
8. Run Setup to reset the date and time.
OM03774
Figure 5-7. Replacing the Battery
■
■
■
■
■
■