System Product Guide
5-1
Installing and Configuring
System Board Options
5
This chapter describes the following:
•
The system board layout
•
The system board configuration jumpers
•
Installing an OverDrive processor upgrade
•
Installing single in-line memory modules (SIMMs)
•
Installing video DRAM (for systems with the optional video subsystem)
•
Replacing the battery
Before You Begin
•
Be sure to do each procedure in the correct order.
•
The procedures (and warnings) for removing and reinstalling the system
cover are assumed to precede all other procedures described in this
chapter. Chapter 4 tells how to remove the system cover.
•
Set up an equipment log to record the system model and serial numbers,
all installed options, and other information about the system. If you
need this information, it will be easier to consult the log than to open up
and examine the system.
•
You will need a flat blade screwdriver, and a jumper removal tool. We
recommend that you use an antistatic wrist strap and a conductive foam
pad when working on the system.
Summary of Contents for apricot VS660
