Mitsubishi Electric apricot VS660, System Product Manual

Page: 28 / 154

System Product Guide
2-9
Resetting the System
To reset the system, press the key sequence:
<Ctrl + Alt + Del>
You can also reset the system by shutting system power off and then
powering back up. To do this:
1. Press the front panel power control button.
2. Wait at least 20 seconds.
3. Press the power button. The system will power up and immediately
begin the power-on self test (POST).
Resetting the system will:
•
Clear the system memory
•
Restart the power-on self test (POST)
•
Reinitialize all peripherals
•
Load the operating system
Using Keyboard Shortcuts
The keyboard controller supports using shortcuts to reset the system (soft
boot) and toggle between fast (turbo) and slow CPU speed.
Normally the CPU runs in fast (turbo) mode at its full rated speed. Some
application software requires running the system in slow mode. Changing
to fast mode by using shortcuts may not be supported by some systems or by
some applications, in which case you can specify fast or slow mode by using
the Setup program. For instance the set slow or fast mode keyboard shortcut
will not work if the CPU is being operated in protected mode. (When you
operate Windows in enhanced mode, the CPU is operating in protected
mode.)
The numbers and symbols in the following tables refer to the keys on the
numeric keypad.