Mitsubishi Electric apricot VS660, System Product Manual

Page: 69 / 154

4-18
Taking Your System Apart
Installing a 5.25-inch Device
▲
▲
!
CAUTIONS
If you are installing a device that should not be accessible
from the front, do not remove the EMI shield and filler
panel.
When removing a plastic filler panel, be careful not to break
the panel or its tabs. Save all EMI shields and filler panels
for reuse if necessary.
1. Observe the precautions in “Before You Begin.”
2. Remove one of the EMI shields from the chassis (Figure 4-10, A). Save
the shield in case you need to it them later.
3. If the device will be accessible from the front, remove the screws
securing the filler panel to the bezel (Figure 4-10, B). Remove the filler
panel. Save the filler panel and screw in case you need to replace them
later.
4. Remove the device from its protective wrapper and place it on an
antistatic surface. Record the model and serial number in the equipment
log.