Mitsubishi Electric apricot VS660, System Product Manual

Page: 74 / 154

System Product Guide
4-23
A
OM04065
Figure 4-13. Removing the System Board
Installing the System Board
1. Observe the precautions in “Before You Begin.”
2. Position the system board over the threaded standoffs inside the chassis
and press it onto the snap-in standoff (Figure 4-13).
3. Secure the board to the chassis with nine screws.
4. Connect all internal cables to the system board.
5. Install any add-in boards.
6. Connect all internal cables that go to the add-in boards installed in the
expansion slots.
■
■
■
■
■
■