Mitsubishi Electric apricot VS660, System Product Manual

Page: 91 / 154

5-16
Installing and Configuring System Board Options
Removing SIMMs
To remove a SIMM, do the following:
1. Observe the precautions in “Before You Begin.”
2. Turn off all peripheral devices connected to the system.
3. Turn off the system.
4. Remove any full-length add-in boards or other components as needed to
gain access to the sockets.
5. Gently spread the retaining clips just enough so you can rotate the top
edge of the SIMM downward to an angle of about 45
°
.
6. Holding the SIMM only by the edges, lift it away from the socket, and
store it in an antistatic package.
7. Reinstall and reconnect any parts you removed or disconnected to gain
access to the SIMM sockets.