Medtronic PROTECTA XT DR D314DRG Clinician Manual Download Page 84

Page: 84 / 508

1. From the device session, launch a new analyzer session by selecting the Analyzer

icon, which is located on the taskbar.

2. Make the desired lead measurements. Identify the measurements by lead type when

you save them.

3. Select [View Saved…].
4. Select which saved measurements to export. You can select up to one measurement

for each lead type.

5. Select [Export]. The selected settings are exported to the Implant window in the device

session.

6. When you are finished, select [Close].
7. Return to the device session by selecting the Device icon on the task bar.

The data is mapped to Atrial and RV columns in the Implant window. As described in

Section 4.10.1, you can add or change an exported measurement by selecting a field in the

Implant window. The exported values are programmed from the Patient Information screen.

4.11 Working with the Live Rhythm Monitor

The Live Rhythm Monitor window displays ECG, Leadless ECG (LECG), Marker Channel

with marker annotations, and telemetered EGM waveform traces on the programmer

screen. The Live Rhythm Monitor window also displays the patient heart rate and interval

in the upper-left corner of the window. You can view live waveform traces, freeze waveform

traces, record live waveform traces from the programmer’s strip chart recorder, and recall

any saved waveform strips prior to ending a patient session.
By default, the Live Rhythm Monitor appears in partial view. You can expand this window

to its full size by selecting the small square button in the upper-right corner of the window

or by selecting the [Adjust…] button. Waveform traces display depending on which

waveform source is selected and how waveform traces have been arranged in the

full-screen view.

Medtronic

PROTECTA™ XT DR D314DRG

Clinician Manual

Summary of Contents for PROTECTA XT DR D314DRG





























































































































































































































































































































































































































































































































Search results

Summary of Contents for PROTECTA XT DR D314DRG

Reviews:

Brands by name

Popular brands

Medtronic PROTECTA XT DR D314DRG, Clinician Manual

Search results

Summary of Contents for PROTECTA XT DR D314DRG

Reviews:

Brands by name

Popular brands