Medtronic PROTECTA XT DR D314DRG Clinician Manual Download Page 55

Page: 55 / 508

established and the programming head is positioned over the device. The device stops

these transmissions when you lift the programming head, unless the Holter Telemetry

feature is programmed to On. If Holter Telemetry is programmed to On, the device transmits

Marker Channel and supplementary marker data regardless of the position of the

programming head.
Device longevity and wireless telemetry – In typical patient session and device operation

scenarios, wireless telemetry has no significant effect on device longevity.

4.2.3 How to interrogate the device during the session

At the start of the patient session the programmer interrogates the device. You can manually

interrogate the device at any time during the patient session by performing the following

steps:

1. Select [Interrogate…] from the Command bar. In a nonwireless session, you may also

interrogate the device by pressing the “I” button on the programming head.

2. To gather information collected since the last patient session, select the Since last

session option from the interrogation window. If you want to gather all of the information

from the device, select the All option.

3. Select [Start].

Note: You cannot manually interrogate the device during an Emergency. You must exit an

Emergency before you can manually interrogate the device.

Medtronic

PROTECTA™ XT DR D314DRG

Clinician Manual

Summary of Contents for PROTECTA XT DR D314DRG





























































































































































































































































































































































































































































































































Search results

Summary of Contents for PROTECTA XT DR D314DRG

Reviews:

Brands by name

Popular brands

Medtronic PROTECTA XT DR D314DRG, Clinician Manual

Search results

Summary of Contents for PROTECTA XT DR D314DRG

Reviews:

Brands by name

Popular brands