manualshive.com logo in svg

Medtronic PROTECTA XT DR D314DRG, Clinician Manual

Share
Download
Medtronic PROTECTA XT DR D314DRG Clinician Manual Download Page 23

2   Warnings, precautions, and potential

adverse events

2.1  General warnings and precautions

Anti-coagulation – Use of the device should not change the application of established

anti-coagulation protocols.
Avoiding shock during handling – Disable tachyarrhythmia detection during implant,

explant, or postmortem procedures. The device can deliver a high-voltage shock if the

defibrillation terminals are touched.
Electrical isolation during implant – Do not allow the patient to have contact with

grounded electrical equipment that might produce electrical current leakage during implant.

Electrical current leakage may induce tachyarrhythmias that may result in the patient’s

death.
External defibrillation equipment – Keep external defibrillation equipment nearby for

immediate use whenever tachyarrhythmias are possible or intentionally induced during

device testing, implant procedures, or post-implant testing.
Lead compatibility – Do not use another manufacturer’s leads without demonstrated

compatibility with Medtronic devices. If a lead is not compatible with a Medtronic device,

the result may be undersensing of cardiac activity, failure to deliver necessary therapy, or

a leaking or intermittent electrical connection.
Occurrence of stroke – Following an ischemic or cerebrovascular accident, disable atrial

cardioversion therapies until the patient has stabilized.

2.2  Explant and disposal

Consider the following information related to device explant and disposal:

●

Interrogate the device and disable tachyarrhythmia detection before explanting,

cleaning, or shipping the device. This prevents the device from delivering unwanted

shocks.

●

Explant the implantable device postmortem. In some countries, explanting

battery-operated implantable devices is mandatory because of environmental

concerns; please check the local regulations. In addition, if subjected to incineration or

cremation temperatures, the device may explode.

Medtronic

PROTECTA™ XT DR D314DRG

Clinician Manual

23

Summary of Contents for PROTECTA XT DR D314DRG





























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands