manualshive.com logo in svg

Medtronic PROTECTA XT DR D314DRG, Clinician Manual

Share
Download
Medtronic PROTECTA XT DR D314DRG Clinician Manual Download Page 156

6.6.2.1  Patient information

Patient information is based on data entered in the Patient Information screen. It includes

any medical history and dates of measurements that have been recorded in the Patient

Information screen.

6.6.2.2  Clinical Status and Observations

The Clinical Status and the Observations sections of the Heart Failure Management Report

include information that can be useful for managing heart failure. This information is also

available on the Quick Look II screen. For more information about Quick Look II data, see

Section 6.2, “Viewing a summary of recently stored data”, page 129. The Heart Failure

Management Report shows the following information:

●

Arrhythmia episode information shows the number of Treated VT/VF episodes and the

number of treated and monitored AT/AF episodes recorded since the last follow-up

appointment.

●

Ventricular and atrial pacing are shown as the percentage of the total time during the

reporting period.

●

The battery status at the start of the session can be OK, RRT (Recommended

Replacement Time), or EOS (End of Service).

●

System-defined observations alert you to conditions that may be related to heart failure.

6.6.2.3  Event information

Figure 40. Event annotations

1

2

1 Current session indicator
2 Last session indicator

Programming and interrogation events – The report shows when the device was

interrogated or programmed, to allow possible correlations between device parameter

changes and other clinical trends.

Medtronic

PROTECTA™ XT DR D314DRG

156

Clinician Manual

Summary of Contents for PROTECTA XT DR D314DRG





























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands