manualshive.com logo in svg

Medtronic PROTECTA XT DR D314DRG, Clinician Manual

Share
Download
Medtronic PROTECTA XT DR D314DRG Clinician Manual Download Page 235

Adjusting the Activity Threshold – For many patients there is no need to reprogram the

Activity Threshold parameter. However, if a patient has minimal rate response during

exercise, the Activity Threshold may need to be programmed to a lower (more sensitive)

setting. The most sensitive setting is “Low”. Conversely, if a patient has an elevated pacing

rate at rest, the Activity Threshold may need to be programmed to a higher (less sensitive)

setting. The least sensitive setting is “High”.
Adjusting Rate Profile Optimization – Before programming other Rate Response

parameters, first verify that the settings for Lower Rate, ADL Rate, and Upper Sensor Rate

are appropriate for the patient.
It may be necessary to reprogram the ADL Response and Exertion Response parameters

if reprogramming the rates does not have the desired effect on Rate Profile Optimization.

By reprogramming the ADL Response and Exertion Response parameters, you can

prescribe a rate profile that matches the patient’s lifestyle or activity levels in each rate range.
Adjust the ADL Response to prescribe how quickly the patient reaches the ADL Rate and

the Exertion Response to prescribe how quickly the patient reaches the Upper Sensor Rate.

In both cases, a lower value decreases the rate responsiveness and a higher value

increases the rate responsiveness.

Note: If increasing the Exertion Response setting does not make Rate Response

aggressive enough, increase the ADL Response setting.
Adjusting the setpoints manually – You can program Rate Profile Optimization to Off

and program the setpoints manually. In this case, the ADL Setpoint and UR Setpoint

determine the pacing rate curve, and rate response calculations continue to operate as

programmed.

7.4.4  Programming Rate Response

Figure 87. Rate Response parameters screens

Medtronic

PROTECTA™ XT DR D314DRG

Clinician Manual

235

Summary of Contents for PROTECTA XT DR D314DRG





























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands