manualshive.com logo in svg

Medtronic PROTECTA XT DR D314DRG, Clinician Manual

Share
Download
Medtronic PROTECTA XT DR D314DRG Clinician Manual Download Page 48

Upon activation, the programmer searches for activated devices within telemetry range. If

a device senses a signal from the programmer, it sends a signal to the programmer and

remains active for 15 min. The programmer then establishes communication with the

device. The Find Patient window is displayed for at least 5 min. If the programmer touch

pen is not used within 5 min, the Find Patient window closes and the Select Model screen

is displayed.

4.1.1.3  How to use the Find Patient window

The programmer lists all patients with wireless-activated implantable devices within

telemetry range in the Patient Name list within the Find Patient window. Patients are listed

in the order in which they were found by the programmer. The list periodically updates to

include patients with newly activated devices and removes patients with devices that are

no longer active, but the order in which the remaining patients appear in the Patient Name

list does not change. The Find Patient window lists patients for whom a session has not

started or has ended.

4.1.1.4  How to verify reliable telemetry between the device and the

programmer

Successful interrogation or programming of the device verifies that reliable telemetry

between the device and the programmer has occurred. When wireless telemetry is first

established during a session, the telemetry status indicator in the upper-left corner of the

programmer task bar changes from the programming head icon to the wireless telemetry

icon shown in Figure 4.
Figure 4. Wireless telemetry icon on the task bar

1 Wireless telemetry icon

The indicator bar on the wireless telemetry icon displays the strength of the wireless

communication signal. Verify that at least 3 of the green lights are illuminated on the indicator

bar to ensure that reliable telemetry has been established between the implanted device

and the programmer.

Medtronic

PROTECTA™ XT DR D314DRG

48

Clinician Manual

Summary of Contents for PROTECTA XT DR D314DRG





























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands