215676
472
Revision A
1004663
A
B
C
Figure 8.13: Hydraulic Fitting
1.
Inspect O-ring (A) and seat (B) for dirt or obvious defects.
2.
Check that O-ring (A) is
NOT
on the threads. Adjust O-
ring (A) if necessary.
3.
Apply hydraulic system oil to the O-ring.
4.
Install fitting (C) into the port until the fitting is hand-tight.
5.
Torque fitting (C) according to values in Table
6.
Check the final condition of the fitting.
