215676
191
Revision A
10. Inspect the windrower for any worn or damaged components and repair them as needed. Tighten loose hardware. For
the hardware torque values, refer to
8.1 Recommended Torque Values, page 465
.
11. Check for any broken components and order replacements from your Dealer. Attending to these items right away will
save time and effort at the beginning of the next season.
12. To protect the cylinder rods from rust and corrosion, retract the header lift cylinders, float cylinders, and header tilt
cylinders.
13. Add an approved rust inhibitor to the engine oil in accordance with the manufacturer
’
s instructions. Run the engine to
operating temperature to mix the inhibitor with the oil, unless otherwise specified.
14. To prevent condensation, fill the hydraulic oil reservoir to the top of the filler neck with approved hydraulic system oil.
For instructions, refer to
5.11.1 Checking and Filling Hydraulic Oil, page 419
15. Test the engine coolant antifreeze concentration to ensure it is sufficient to protect the engine against the lowest
expected ambient temperature.
