215676
221
Revision A
1000774
A
B
Figure 4.120: Header Drive Hoses and Harness
21. Connect header drive hoses (A) and electrical harness (B) to
the header. For instructions, refer to the header operator
’
s
manual.
1000775
A
Figure 4.121: Reel Hydraulics
22. Connect reel hydraulics (A) at the right cab-forward side of
the windrower. For instructions, refer to the draper header
operator
’
s manual.
Attaching D or D1 Series Draper Header
–
Hydraulic Center-Link without Self-Alignment
If the windrower is equipped with a hydraulic center-link that lacks the self-alignment capability, the Operator will have to
manually attach the hydraulic center-link
’
s hook to the header
’
s center pin.
NOTE:
Draper header boots must be installed onto the windrower
’
s lift linkage before starting this procedure. For instructions,
refer to
4.5.1 Attaching Header Boots, page 215
.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat for any reason.
1.
Shut down the engine, and remove the key from the ignition.
