215676
262
Revision A
1029697
A
Figure 4.225: Safety Prop
8.
To disengage the safety props on the lift cylinders:
a.
Turn lever (A) away from the header to raise the safety
prop until the lever locks into the vertical position.
b.
Repeat the previous step for the opposite cylinder.
9.
Start the engine, choose a level area, and lower the header
to the ground.
10. Shut down the engine, and remove the key from
the ignition.
1000769
A
B
C
D
Figure 4.226: Mechanical Center-Link
11. Loosen nut (A) and rotate barrel (B) to relieve the load on
the link.
12. Remove cotter pin (D) on clevis pin (C) and remove the pin
to disconnect from the header.
13. Reinstall the clevis pin in the header.
1000784
A
B
Figure 4.227: Header Drive Hydraulics
14. Disconnect header drive hydraulics (A) and electrical
harness (B). Refer to the auger header operator
’
s manual.
15. Slowly back the windrower away from the header.
