215676
292
Revision A
1.
To set the minimum reel speed:
IMPORTANT:
Set the minimum reel speed while stationary (that is, with the ground speed lever [GSL] in the N-DETENT position).
a.
Start the engine.
b.
Engage the header.
c.
Set HEADER INDEX switch (B) to ON.
d.
Press DISPLAY SELECTOR button (E) on the GSL or press FAST button (C) or SLOW button (D) to display the
message ##.## MIN REEL at location (A). The displayed value represents the minimum reel speed in terms of rpm
or mph or km/h, depending on how the cab display module (CDM) is configured.
e.
Press FAST switch (C) or SLOW switch (D) until the desired minimum reel speed is achieved.
2.
Set the reel index as follows:
IMPORTANT:
The reel index setting can only be adjusted while operating at a ground speed faster than the configured minimum reel
speed plus the configured header index value.
a.
Set HEADER INDEX switch (B) to ON.
b.
Press DISPLAY SELECTOR button (E) on the GSL or press FAST button (C) or SLOW button (D). The CDM will display
the message ##.## ##.# REEL IND.
21
•
The first term displayed on the CDM, ##.##, represents the reel speed in terms of rpm or mph or km/h,
depending on how the CDM is configured.)
•
The second term displayed on the CDM, #.##, represents the reel index setting.
c.
Press FAST button (C) or SLOW button (D) until the desired reel index setting is achieved.
NOTE:
The reel will continue operating at the minimum reel speed setting when the ground speed drops below the set value.
CDM screen (A) may display the message ##.## MIN REEL (RPM or MPH or KPH). This message indicates that the Operator
should change the minimum reel speed or should increase the windrower
’
s ground speed. This message will appear if the
sum of the ground speed and the index value is less than the minimum reel speed set-point.
Examples:
•
Windrower is operating at 13 km/h (8 mph) with header index ON and set at -1.0.
Display shows 7.0 -1.0 REEL IND where 7.0 (8.0-1.0) is the reel speed in mph and -1.0 is the HEADER INDEX setting.
•
Windrower speed drops to 12 km/h (7.5 mph) at same header index setting.
Display shows 6.5 -1.0 REEL IND where 6.5 (7.5-1.0) is the reel speed in mph and -1.0 is the HEADER INDEX setting.
•
Windrower is operating at 13 km/h (8 mph) with header index ON and set at 2.0.
Display shows: 10.0 2.0 REEL IND where 10.0 (8+2.0) is the reel speed in mph and 2.0 is the HEADER INDEX setting.
21. The message REEL IND will only be displayed when the windrower is operating at a ground speed faster than
minimum reel speed plus the header index speed.