215676
62
Revision A
3.16
Engine Controls and Gauges
The ignition, fuel gauge, engine temperature gauge, and throttle are located on the operator
’
s console.
1000614
A
B
C
D
Figure 3.43: Engine Controls and Gauges
Ignition switch (A)
The features of the windrower which are active depend on the
position of the ignition key:
•
ACC (accessory): Features such as exterior lighting will be
available in this mode. Turn the ignition key fully
counterclockwise to activate this mode
•
OFF: One position clockwise of ACC. The engine and all
accessories will be off when the key is in this position.
•
RUN: The key will remain in this position after the engine
has been started.
•
START: Turn the ignition key fully clockwise to crank the
engine. Once the engine has started, the key will sit in
the RUN position
NOTE:
Remove the key when the windrower is not in use; the key also locks the windrower
’
s cab doors.
Engine coolant temperature gauge (B)
•
Normal running temperature: 82°
–
104°C (180°
–
220°F)
NOTE:
For information about temperature warnings and alarms, refer to
Display Warnings and Alarms, page 82
Fuel gauge (C)
•
E: Empty
•
F: Full
Throttle (D)
controls engine speed
•
FULL: Push the throttle lever fully forward to run the engine at its maximum speed
•
OPERATING: Refer to
Driving Forward in Cab-Forward Mode, page 168
to learn the appropriate engine speed for
various tasks.
•
CLOSED: Pull the throttle lever all the way back
