215676
215
Revision A
4.5
Attaching and Detaching Headers
Follow these procedures to safely attach and detach these MacDon headers to and from the windrower.
4.5.1
Attaching Header Boots
Header boots are required to attach a D Series or D1 Series Draper Header to the windrower. Attach header boots to the
windrower
’
s lift linkage if they are not already installed. Header boots are supplied with the header.
1029714
A
B
Figure 4.105: Header Float Linkage
IMPORTANT:
To prevent damage to the lift system when lowering the header
lift linkages without a header or a weight box attached to the
windrower, ensure that the float engagement pin is installed in
storage position (B) and
NOT
in engaged position (A).
1000752
A
B
Figure 4.106: Header Boot
1.
Remove pin (B) from boot (A).
1000753
A
B
C
D
Figure 4.107: Header Boot
2.
Position boot (B) onto lift linkage (A) and reinstall pin (C).
The pin may be installed from either side of the boot.
3.
Secure pin (C) with hairpin (D).
4.
Repeat Step
to Step
to install the
boot on the opposite side of the windrower.
