215676
225
Revision A
1000771
A
B
C
D
Figure 4.130: Header Leg
15. Install pin (B) through the header leg, engaging the
U-bracket in the lift linkage. Secure the pin with hairpin (A).
16. Raise header stand (D) to its storage position by pulling
spring pin (C) and lifting the stand into the uppermost
position. Release the spring pin.
1029712
A
B
Figure 4.131: Header Float Linkage
17. Remove the clevis pin from storage position (B) in the
linkage and insert it into hole (A) to engage the float
springs. Secure it with the hairpin. Repeat this step on the
opposite float linkage.
1029697
A
Figure 4.132: Safety Prop Lever
18. Disengage the safety prop by turning lever (A) downwards
until the lever locks into the vertical position.
19. Repeat the previous step for the opposite safety prop.
