215676
378
Revision A
1000169
A
B
C
E
D
Figure 5.108: Screen Cleaner
NOTE:
The screen cleaner rotors rotate counterclockwise. It is
acceptable for the rotors to touch the screen, so long as
their rotation is not slowed or obstructed.
3.
Loosen nut (B) on motor support (C).
4.
Move the support in or out until duct (A) is 2
–
6 mm
(0.079
–
0.236 in.) from the screen near the center.
5.
Tighten nut (B).
6.
Loosen two motor mount bolts (D).
7.
Move motor/duct assembly (E) until there is a gap of
1
–
8 mm (0.039
–
0.314 in.) between the screen and the
rotor when it is fully rotated.
8.
Tighten nuts (D) on the motor mount.
9.
Close the hood. For instructions, refer to
.
Closing Cooler Box Screen
Once you are finished maintaining or servicing the cooler box, close the cooler box screen.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat for any reason.
1.
Shut down the engine, and remove the key from the ignition.
1000170
A
B
Figure 5.109: Engine Cooling System
2.
Unhook the support rod and store it in the screen door.
Close screen access door (B) and engage latch (A).
3.
Close the hood. For instructions, refer to
.
