215676
258
Revision A
1029697
A
Figure 4.215: Safety Props
12. Disengage the safety props by turning lever (A) away from
the header to raise the safety prop until the lever locks into
the vertical position.
13. Repeat the previous step to release the safety prop on the
opposite cylinder.
14. Start the engine, choose a level area, and lower the header
to the ground.
1008948
A
B
Figure 4.216: Ground Speed Lever
15. Press HEADER TILT UP switch (A) or HEADER TILT DOWN
switch (B) on the GSL to relieve the load on the center-link
cylinder.
1000768
A
B
C
Figure 4.217: Hydraulic Center-Link
16. Shut down the engine, and remove the key from the
ignition.
17. Lift hook release (C) and lift hook (B) off of the header pin.
NOTE:
If the optional center-link self-alignment kit is installed, lift
release (C) and then operate link lift cylinder (A) using the
REEL UP switch on the GSL to disengage the center-link
from the header.
