215676
336
Revision A
1000125
A
B
Figure 5.32: Cab Fresh Air Filter Access
3.
Slide filter tray (B) into the housing.
NOTE:
If necessary, move the Global Positioning System (GPS)
wiring harnesses to the left engine-forward side of the
housing before inserting the filter tray.
4.
Close and latch housing door (A).
5.8.2
Servicing Return Air Cleaner/Filter
Before the return air filter can be cleaned and inspected, it must be removed from the windrower
’
s cab.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat for any reason.
If you intend to replace the return air filter, refer to
8.2.4 Filter Part Numbers, page 478
for the appropriate part number.
1000132
A
B
Figure 5.33: Return Air Filter
1.
Unscrew two knobs (A) attaching the cover and the filter to
the cab wall. Remove the cover and remove filter
assembly (B).
