215676
270
Revision A
1021748
A
B
C
Figure 4.245: Header Support
3.
Remove hairpin (B) from clevis pin (A), and then remove
the clevis pin from header support (C) on both sides of the
header.
1029714
A
B
Figure 4.246: Header Float Linkage
4.
To disengage the float springs, move the float engagement
pin from engaged position (A) and insert the pin into
storage hole (B). Secure the float engagement pin with a
lynch pin. Repeat this step for the opposite linkage.
IMPORTANT:
To avoid damaging the lift system when lowering the
header lift linkages without a header or a weight box
attached, ensure that the float engagement pin is installed
in storage position (B) and
NOT
in engaged position (A).
1008925
A
Figure 4.247: Ground Speed Lever
DANGER
Ensure that all bystanders have cleared the area.
5.
Start the engine and activate HEADER DOWN button (A) on
the ground speed lever (GSL) to fully retract the header lift
cylinders.
IMPORTANT:
Before starting the engine for the first time the windrower
is operated in a season, remove the protective cover from
the exhaust stack.
